How to Use

Pour water from the top. When the red part of the level stick appears, the basin hold the maximum quantity it can take (approx. 5 liters).

THE MOTOR COVER SHOULD NEVER BE REMOVED WHILE WATER IS BEING FILLED.

The basin must never be filled beyond the level mark. Switch on the mains (220 VAC) after the unit is filled with water. Ensure proper ventilation for better cooling.

How to Clean

To clean the plastic parts, use lukewarm water with some dish detergent. To clean the atomizer, proceed as follows:

FIRST PULL OUT THE MAIN PLUG:

Unscrew the suction tube, and lift out the spinning plate. Use a small brush to clean them. Rub the free shaft-end dry and lightly oil it. Put back the spinning plate and screw back the suction tube.

Do's and Dont's

• Try placing the unit near a window in summer (all window should be closed during winter). The top portion should be at
   least 30 cms. Away from furniture and at least 150 cms from the ceiling.
 
• Never overfill the water basin (beyond 5 liters).
 
• While cleaning, do not remove the atomizer ring from its seat. Do not dip the atomizer unit into water or hold it directly
   under the running water. Make sure that no. Water enters the motor at the cord outlet.
 
• You can add perfumes to the water for a fragrant atmosphere. Or disinfectants for a hygienic atmosphere.